Getting To Know Your Cleaner; Assembling Your Cleaner; Using Your Cleaner - Hoover Khross User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

GETTING TO KNOW YOUR CLEANER

A.
Cord Reel Pedal
B.
Exhaust Filter Cover
C.
Exhaust Filter
D.
Parking Slot
E.
On/Off Pedal
F.
Dust Bin Release Button
G.
Dust Container Assembly
H.
Main Body
I.
Hose
J.
Suction Regulator
K.
Hose Handle
L.
Telescopic Tube
M.
Telescopic Tube Adjuster
N.
Floor Type Selector Pedal*
O. & O1. Carpet and Floor Nozzle (GP)**
O2. Carpet Nozzle (CA)**
O3. Hard Floor Nozzle (HF)**
P.
Dust container flap
Q.
Dust container flap release button
R.
Dust Container
S.
Multi-cyclone separation unit
T.
Pre-motor filter
U.
Dust container cover
V.
2 in 1 Accessory
W.
Pet Hair Remover Mini Turbo Nozzle*
X.
Allergen Remover Mini Turbo Nozzle*
Y.
Parquet Nozzle*

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the button on the hose end and pull. [1]
2. Connect the hose handle to the upper end of the extension tube [2], or accessories if required.
3. Connect the lower end of the extension tube to the Carpet & Floor nozzle** [3] or
accessories if required.

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [4]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster
up and raise or lower the handle to the most comfortable cleaning position. [5]
*Certain Models Only
** Certain models only, nozzles may vary according to model
3. Carpet and Floor Nozzle** - Press the floor type selector on the nozzle [6] to select the
ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
Carpet & Floor Nozzle**: [7]
-
Hard floors Cleaning: Press the pedal on the nozzle on Hard Floor mode and adjust the
slider on the nozzle on ALL FLOORS. In this position brushes, wheels and wiper blade
are lowered to protect hard floors. [7a]
-
Standard Carpet & Rugs Cleaning: Press the pedal on the nozzle on Carpet mode
and adjust the slider on the nozzle on ALL FLOORS. In this position brushes and wiper
blade are raised while wheels are lowered to allow a perfect ease of movement on such
surfaces. [7b]
-
Deep Carpet Cleaning: Press the pedal on the nozzle on Carpet mode and adjust the
slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels and
wiper blade are raised for a deeper cleaning of your carpet. [7c]
WARNING: It is recommended to avoid potential scratching of wooden floors that
the pedal is not set on hard floor mode and the slider on deep carpet cleaning.
4. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [8]
5. Adjust the suction regulator on the handle to the desired level. [9]
6. Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord
reel pedal to wind the power cord back into the cleaner. [10]
PARKING AND STORAGE SECTION
The tube and the nozzle can be parked on the back of the cleaner for storage or temporary
storage while in use. [11]
ACCESSORIES AND NOZZLES
To obtain the best performance and efficiency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams by
the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended for
occasional use only.
All accessories can be fitted to the end of the hose handle or to the end of the telescopic tube.
2 in 1 tool – Combines several functions into one tool: [V]
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.
Crevice Tool – For corners and hard to reach areas.
Parquet Nozzle* – For parquet floors and other delicate floors. [Y]
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs
removal. [W]
2
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents