Morini Franco Motori S6-C COMPETITION Service Manual page 33

DIAGRAM DESCRIPTION
Install the FLYWHEEL STATOR with
the output cable facing the crankcase.
Secure the flywheel stator with
2 BOLTS M4 x 18
Drive in the 2 elastic dowel pins in the
cover. and make sure that they do
NOT INTERFERE with the bracket
mounting face.
Assemble the BRACKET on the
flywheel cover.
Assemble the FLYWHEEL COVER
placing the rubber fairleads in their
proper seats on the cover.
Secure the FLYWHEEL COVER using:
3 SCREWS M5X50 + WASHER.
1 SCREW M5X20 + WASHER.
Page 30
ENGINE
S6 / C
TOOL
NOTES
CODE
Tightening torque
3 - 4 Nm
Tightening torque
3-4 N.m.