Set Up Items - Sony DSC-P2 Operating Instructions (primary manual) Operating Instructions Manual

SET UP items

Set the mode dial to SET UP. The SET UP
screen appears.
Factory settings are indicated with x.
CAMERA
Item
MOVING IMAGE
DATE/TIME
DIGITAL ZOOM
RED EYE REDUCTION ON /
AF ILLUMINATOR
SETUP 1
Item Setting
FORMAT OK / CANCEL
FILE NUMBER
x
RESET
/ LANGUAGE x ENGLISH
CLOCK SET
OK / CANCEL
92
When shooting movies, or images recorded
in Clip Motion/Multi Burst modes, the date
and time cannot be inserted in the image.
Also, the date and time will not be displayed
when shooting. The date and time will be
displayed when the image is played back.
Setting
x MPEG MOVIE CLIP MOTION
/
MULTI BURST
/
DAY & TIME DATE OFF
/ / x
ON OFF
x /
OFF
x
AUTO / OFF
x
Description
Formats the "Memory Stick." Please note that formatting erases all the information recorded on a
"Memory Stick," including even erasure protected images (page 38).
SERIES – Assigns numbers to files in sequence even if the "Memory Stick" is changed.
– Resets the file numbering and starts from 0001 each time the "Memory Stick" is changed.
– Displays the menu items, warnings and messages in English.
– Displays the menu items, warnings and messages in Japanese.
/ JPN
Sets the date and time (page 15).
Description
Selects the shooting mode (pages 50, 56, 57, 69).
Selects whether to insert the date and time into the image (page 27).
Selects whether to use the digital zoom (page 22).
Reduces the red-eye phenomenon when using a flash (page 25).
Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus
on the subject under dark lighting (page 25).