Inserting and removing a "Memory Stick"
1
, Open the battery/"Memory
Stick" cover.
Slide the cover in the direction of the arrow.
Connector side
2
Label side
, Insert the "Memory Stick."
Insert the "Memory Stick" all the way in
until it clicks as shown in the illustration.
• Whenever you insert a "Memory Stick," push it
all the way in until it clicks. If you do not insert
it correctly, a proper recording or playback may
not be carried out.
Shooting still images
Access lamp
3
, Close the battery/"Memory
Stick" cover.
To remove the "Memory Stick"
Open the battery/"Memory Stick" cover,
then push the "Memory Stick" to pop it out.
• Whenever the Access lamp is lit, the
camera is recording or reading out an
image. Never remove the "Memory
Stick" or turn off the power at this time.
17