Shooting With The Date And Time Inserted - Sony DSC-P2 Operating Instructions (primary manual) Operating Instructions Manual

Shooting with the date and
time inserted
CAMERA
MOVING IMAGE : MPEG MOVIE
DATE/TIME : OFF
DIGITAL ZOOM : O N
RED EYE REDUCTION : OFF
AF ILLUMINATOR : AUTO
SELECT
1
, Set the mode dial to SET UP.
The SET UP menu is displayed.
• When images are shot with the date and time
inserted, the date and time cannot be removed
later.
• When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, instead, "
displayed in the upper left portion of the LCD
screen. The actual date and time are displayed
when the image is played back.
• When you chose [DATE] in Step 3, the date
will be inserted in the order set in "Setting the
date and time" (page 15).
OK
2
, Select (CAMERA) using v/V
on the control button and
press B.
Select [DATE/TIME] using v/V
and press B.
" is
CAMERA
MOVING IMAGE : DAY&TIME
DATE/TIME : DATE
DIGITAL ZOOM : OFF
RED EYE REDUCTION :
AF ILLUMINATOR :
3
, Select the type of data to be
DAY&TIME: Inserts the date and the time
of shooting into the image
DATE: Inserts the year, the month and the
date of shooting into the image
OFF: Does not insert date/time data into the
image
After the setting has been completed, set the
mode dial to
shooting.
• You can also carry out this operation when the
mode dial is set to SCN.
• The settings made here will be saved even when
the power is turned off.
CAMERA
MOVING IMAGE : MPEG MOVIE
DATE/TIME : DATE
DIGITAL ZOOM : O N
RED EYE REDUCTION : OFF
AF ILLUMINATOR : AUTO
PAGE SELECT
inserted using v/V on the
control button, then press the
center z.
, and continue your
27