Sony Handycam DCR-TRV6 Operating Instructions Manual page 107

Superimposing a still picture in a "Memory Stick" on a moving
picture – MEMORY MIX
Items to be adjusted
M. CHROM
M. LUMI
C. CHROM
M. OVERLAP No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
To change the still picture to be superimposed
Do either of the following:
– Press MEMORY+/– before step 6.
– Press the SEL/PUSH EXEC dial befor step 6, and repeat the procedure form step 4.
To change the mode setting
Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4.
To cancel M. CHROM/M. LUMI/C. CHROM/M. OVERLAP
Press MEMORY MIX again.
During recording
You cannot change the mode setting.
The "Memory Stick" supplied with your camcorder has stored 20 images
– For M.CHROM : 18 images (such as a frame) 100-0001 ~ 100-0018
– For C.CHROM : 2 images (such as a background) 100-0019 ~ 100-0020
Sample images
Sample images stored in the "Memory Stick" supplied with your camcorder are
protected (p. 120).
If a still picture to be superimposed has lots of white areas
The thumbnail image may not be displayed clearly.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
Note
When the overlapping still picture has a large amount of white, the thumbnail image of
the picture may not be clear.
The color (blue) scheme of the area in the still picture which is to be
swapped with a moving picture
The color (bright) scheme of the area in the still picture which is to be
swapped with a moving picture
The color (blue) scheme of the area in the moving picture which is to be
swapped with a still picture
107