Important Unpacking Instructions - Cuisinart Elemental FP-13DC Series Instruction And Recipe Booklet

IMPORTANT UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
13-Cup (3.1 L) Food Processor with Dicing and
accessories:
Large 13-cup (3.1 L) work bowl, small 4.5-cup
(1.1 L) work bowl, work bowl cover with multiple
feed tubes with interlock, accessory storage case,
dicing kit and instruction/recipe book.
CAUTION: THE CUTTING TOOLS HAVE
VERY SHARP EDGES.
To avoid injury when unpacking the parts,
please follow these instructions.
1. Place the box on a low table or on the floor
next to the kitchen counter where you intend
to keep the food processor. Be sure the box is
right side up.
2. Open top flaps – there will be a rectangular
block of packing material that holds the
processor parts, each fitted into a cavity.
3. Remove the instruction/recipe book.
4. Lift out the packing material.
5. Remove the base, the 13- and 4.5 cup
(3.1 L and 1.1 L) work bowls, and place it on
the counter or table. Assemble the work bowls
on the base by placing them over the shaft
using the handle to turn the work bowl
clockwise to lock it.
6. Always read the Assembly Instructions
7. When ready to use your machine, unlock the
Elemental
® TM
Carefully remove the slicing disc and shredding
disc by using the plastic hub.
Remember to lock the parts in the storage case
when not in use.
8. Save the shipping cartons and plastic foam
Storage Box
3
thoroughly before using your food processor.
accessory storage case, lift the cover and
remove the clamshell to access the small
metal chopping/mixing blade, dough blade,
large metal chopping/mixing blade, stem
adapter, adjustable slicing disc, and reversible
shredding disc, are each in a cavity.
CAREFULLY REMOVE THE METAL
CHOPPING/MIXING BLADE BY GRASPING
THE CENTER HUB AND LIFTING IT
STRAIGHT UP. NEVER TOUCH THE BLADES,
AS THEY ARE RAZOR SHARP. CAREFULLY
REMOVE THE ADJUSTABLE SLICING DISC
BY USING THE PLASTIC HUB. DO NOT
TOUCH THE BLADE, IT IS VERY SHARP.
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment. NOTE: We recommend that
you visit our website, www.cuisinart.ca for a
fast, efficient way to complete your product
registration.
Housing/Base
Dicing
Storage
Box
Work Bowl/
Pushers