Playing Back Tape With Digital Effect - Sony DCR-TRV38 PIXELA ImageMixer v1.5 Operating Instructions Manual

Playing back tape with digital effect

The POWER switch should be set to
Operate by touching the panel.
(1) During playback or playback pause, press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a digital effect is displayed.
(3) Select a desired mode. You can use STILL, FLASH, LUMI. and TRAIL. See
page 55 for details of the each mode.
When you select STILL or LUMI., the picture that you select the mode to is
stored in memory as a still image.
(4) Press –/+ to adjust the effect.
(5) Press
To return to FN
Press EXIT.
To cancel digital effect
Press OFF to return to PAGE2.
Notes
• You cannot process externally input scenes using digital effect.
• You cannot record images on the tape on your camcorder while you are processing
the image using digital effect. Record images on the "Memory Stick" (p. 110, 119), or
on a VCR using your camcorder as a player.
Pictures processed by digital effect
Pictures processed by digital effect are not output through the DV Interface.
OK to return to PAGE2.
2
DIG
EFFT
.
DIG EFFT
OFF OK
STILL FLASH LUMI. TRAIL
69