Viewing Images Recorded On "Memory Stick" On A Computer (For Macintosh Users) - Sony DCR-TRV38 PIXELA ImageMixer v1.5 Operating Instructions Manual

Viewing images recorded on "Memory
Stick" on a computer
(For Macintosh users)
Viewing images
Before operation
•You need to install the USB driver to view the "Memory Stick" images on a computer
(p. 161).
•QuickTime 3.0 or later must be installed to play back moving pictures.
(1) Turn on the computer and allow Mac OS to load.
(2) Insert the "Memory Stick" into your camcorder, then connect the AC Adaptor
to your camcorder.
(3) Set the POWER switch to MEMORY.
(4) Connect the
using the supplied USB cable.
The USB MODE indicator appears on the screen of your camcorder.
(5) Double-click the "Memory Stick" icon on the desktop.
The folders inside the "Memory Stick" are displayed.
(6) Double-click a desired image file from the folder in this order.
"DCIM" folder t "sssMSDCF" folder
1)
sss stands for any number (within the range) from 101 to 999.
2)
Copying a file to the hard disk of a computer before viewing it is recommended. If
you play back the file directly from the "Memory Stick," the image and sound may
break off.
Disconnect the USB cable and eject the "Memory Stick" or set
the POWER switch to OFF (CHG)
(1) Close all running applications.
Make sure that the access lamp of your camcorder is not lit.
(2) Drag the "Memory Stick" icon into the "Trash." Alternatively, select the
"Memory Stick" icon by clicking on it, then select "Eject disk" from the
"Special" menu at the top left of the screen.
(3) Disconnect the USB cable and eject the "Memory Stick" or set the POWER
switch to OFF (CHG).
For Mac OS X (v10.0) users
Shut down the computer, then disconnect the USB cable and eject the "Memory Stick"
or set the POWER switch to OFF (CHG).
162
(USB) jack on your camcorder to the USB port on the computer
1) t Image file 2)