Interval Recording - Sony DCR-TRV38 PIXELA ImageMixer v1.5 Operating Instructions Manual

Interval Recording

You can make a time-lapse recording by setting your camcorder to automatically record
and standby sequentially. You can achieve an excellent recording for flowering,
emergence, etc. with this function.
There may be a discrepancy in recording time of up to +/– six frames from the selected
time.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select INT. REC in
(4) Select SET, then press EXEC.
(5) Select INTERVAL, then press EXEC.
(6) Select a desired interval time, then press EXEC.
(7) Select REC TIME, then press EXEC.
(8) Select a desired recording time, then press EXEC.
(9) Press
(10) Set INT. REC to ON, then press EXEC.
(11) Press EXIT to return to FN.
(12) Press START/STOP to start Interval Recording.
4
TAPE SET
I NT. REC
I NTERVAL
REC T I ME
To cancel Interval Recording
Set INT. REC to OFF in the menu settings.
64
Example
1 s
[a]
10 min
[a] REC TIME
[b] INTERVAL
The time: 30SEC y 1MIN y 5MIN y 10MIN
The time: 0.5SEC y 1SEC y 1.5SEC y 2SEC
RET.
The INTERVAL TAPE indicator flashes on the screen.
The INTERVAL TAPE indicator lights up during Interval Recording.
5
EXIT
30SEC
EXEC RET.
1 s
9 min 59 s
[a]
[b] [b]
10 min
, then press EXEC (p. 174).
TAPE SET
EXIT
I NT. REC
I NTERVAL 30SEC
REC T I ME 1M I N
5M I N
10M I N
EXEC RET.
9 min 59 s
.
7
TAPE SET
I NT. REC
I NTERVAL
REC T I ME
EXIT
0 . 5SEC
1SEC
1 . 5SEC
2SEC
EXEC RET.