Sony Handycam DCR-TRV380 Operation Manual page 95

indicators and words entered on the index screen of
the "Memory Stick."
1
Connect your VCR to the camcorder
as a recording device (p. 89).
You can use either the A/V connecting
cable or the i.LINK cable to make the
connection. The dubbing procedure is
easier with the i.LINK connection.
2
Prepare your VCR.
• Insert a cassette for recording.
• Set the input selector to input mode if your
VCR has one.
3
Prepare your camcorder (playing
device).
• Insert a cassette for editing.
• Slide the POWER switch to select the
PLAY/EDIT mode.
4
Touch .
5
Touch [MENU].
60min 0:00:00:00
MEMORY SET
STILL SET
MOVIE SET
ALL ERASE
OK
6
Touch / to select
PLAY), then touch
60min 0:00:00:00
D. EFFECT
PICT. EFFECT
PRINT
VAR. SPD PB
REC CTRL
PROG. EDIT
OK
REC CTRL
(EDIT/
.
7
Touch / to select [PROG.
EDIT], then touch
PROG. EDIT 0:00:00:00
END
Select the media.
OTHER MEMORY
DEVICE STICK
8
Touch [OTHER DEVICE].
PROG. EDIT 0:00:00:00
MARK EDIT
START UNDO
IN SET
TOTAL 0:00:00:00
SCENE 0
END
9
Touch [EDIT SET].
PROG. EDIT 0:00:00:00
EDIT SET
END
CON– ADJ
TROL TEST
1/2
CUT– CUT–
IN OUT
10
Touch [CONTROL].
PROG. EDIT 0:00:00:00
CONTROL IR
IR i. LINK
11
Select [IR] or [i.LINK].
When connecting with an A/V
connecting cable
Touch [IR], then
described in "To set the [IR SETUP] code"
(p. 96).
When connecting with an i.LINK
cable
Touch [i.LINK], then
2 : Adjusting the synchronization of the
VCR" (p. 97).
.
. Follow the procedure
. Go on to "Step
,continued
95
Dubbing/Editing