AUDIO MIX
You can adjust the audio balance between the main sound (ST1) and the sub sound
(ST2) on the tape.
Notes
b
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
• For DCR-TRV480:
You cannot adjust the balance for tapes recorded on other devices in the Hi8
standard 8 mm
LCD SET
The recorded picture will not be affected by this setting.
LCD BRIGHT
See page 20 for details.
LCD BL LEVEL
You can adjust the brightness of the LCD screen's backlight.
GNORMAL
BRIGHT
Notes
b
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
Touch
system.
Standard brightness.
Select to brighten the LCD screen.
/
to adjust the color on the LCD screen.
Low intensity
High intensity
Using the Menu
/
,continued
81