Data Code; Remote Ctrl; Rec Lamp - Sony Handycam DCR-TRV380 Operation Manual

USB-PLY/EDT
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick" in your camcorder on your computer. For details,
refer to "First Step Guide" in the supplied CD-ROM.
GSTD-USB
PictBridge
USB STREAM

DATA CODE

GOFF
DATE/TIME
CAMERA DATA
REMAINING
GAUTO
ON

REMOTE CTRL

GON
OFF
Note
b
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.

REC LAMP

GON
Select to view the picture on the "Memory Stick."
Select to connect the PictBridge compliant printer (p. 104).
Select to view the picture on the tape.
Select not to display date, time and the camera settings data during
playback.
Select to display the date and time during playback (p. 57).
Select to display the camera settings data during playback (p. 57).
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch (play/pause).
Select to always display the remaining tape indicator.
Select when using the Remote Commander supplied with your
camcorder.
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
,continued
83
Using the Menu