Sony Handycam DCR-TRV320E Operating Instructions Manual page 91

Changing the menu settings
Icon/item Mode
LCD B. L.
z BRT NORMAL
LCD COLOUR
CONTINUOUS* z OFF
QUALITY* z FINE
FLD./FRAME* z FIELD
PRINT MARK* z OFF
PROTECT* z OFF
SLIDE SHOW*
DELETE ALL*
FORMAT*
z RETURN
PHOTO SAVE*
* DCR-TRV320E only
Notes on LCD B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during recording.
• When you use power sources other than the battery pack, BRIGHT is automatically selected.
Notes on formatting
• Supplied or optional "Memory Stick"s have been formatted at factory. Formatting with this camcorder is
not required.
• Do not turn the POWER switch or press any button while the display shows FORMATTING.
• You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set to LOCK.
• Format again if the message
Formatting erases all information on the "Memory Stick"
Check the contents of the "Memory Stick" before formatting.
• Formatting erases sample images on the "Memory Stick."
• Formatting erases the protected image data on the "Memory Stick."
Meaning
To set the brightness on the LCD screen normal
BRIGHT To brighten the LCD screen
To adjust the colour on the LCD screen, turning the
SEL/PUSH EXEC dial to adjust the following bar
To lighten
Not to record continuously
MULTI SCRN To record 9 images continuously (p. 109)
To record still images in the fine image quality mode,
using the "Memory Stick"
STANDARD To record still images in the standard image quality
mode, using the "Memory Stick"
To record moving subjects
FRAME To record stopping subjects in high quality
To cancel print marks on still images.
ON To write a print mark on the recorded still images
you want to print out later
Not to protect still images
ON To protect selected still images against accidental
erasure (p. 132)
To play back images in a continuous loop (p. 130)
To delete all the images (p. 135)
To cancel formatting.
FORMAT To format an inserted "Memory Stick."
1. Select FORMAT with the SEL/PUSH EXEC dial,
then press the dial.
2. Turn the SEL/PUSH EXEC dial to select FORMAT,
then press the dial.
3. After EXECUTE appears, press the SEL/PUSH
EXEC dial. FORMATTING appears during
formatting. COMPLETE appears when formatting is
finished.
To duplicate still images (p. 121)
appears.
To darken
POWER
switch
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
VTR
91