Table of Contents
Advertisement
Quick Links
BEFORE YOU BEGIN
BEFORE YOU BEGIN
IMPORTANT !
·
Turn off the water supply.
·
The plumbing installation must comply with all local water
supply and building regulations.
·
Before installation carefully inspect the new fixture for any
signs of damage.
·
Ensure all required electrical work has been completed
before installing the furniture.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain import care, cleaning, and
warranty information please leave these instructions for
the consumer.
·
Escale bathroom cabinet includes a series of washbasin
cabinet with visible surfaces of oak grain. The series
adopt E1 grade wood-based panel of high quality, and
with further processing, its harmful emissions will be less
than 1.5mg/L. Washbasin cabinets with single door and
double doors are available.
·
Installer: This manual is the property of the customer and
must be retained with the product for maintenance and
operational purposes.
NOTE
Cabinets are very heavy. Get help lifting and moving the
cabinets.
ORDERING INFORMATION
This installation and user guide covers the installation of the
following for the Escale range:
Escale Vanity Top Cabinet.........................................K-19611T
Bathroom Furniture Legs ..........................................K-15455T
Escale Vessel Cabinet RH ........................................K-19612T
1038407-T01-D
·
·
·
·
·
·
·
E1
1.5mg/L
·
................................................................K-15455T
(
215500
-1-
ESCALE
INSTALLATION INSTRUCTIONS
VANITY TOP CABINET
K-19611T, K-15455T, K-19612T
..............................................K-19611T
) ....................................K-19612T
Copyright Kohler China Ltd., 2009
, 2009
Advertisement
Table of Contents
Related Manuals for Kohler ESCALE K-19611T
Summary of Contents for Kohler ESCALE K-19611T
- Page 1 · All information in these instructions is based upon the · latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Safety Warnings
SAFETY: WARNINGS Kohler products are precision-engineered and should give continued superior and safe performance, provided: 1. They are installed, commissioned, operated and maintained in accordance with the recommendations given in this Manual. 2. Periodic attention is given, as necessary, to maintain the product in good functional order. -
Page 3: Specification
K-15455T SPECIFICATION Plumbing Connections Hot (H) and Cold inlets must be connected to the correct inlet pipes. INSTALLATION Install the Plumbing Install the drain in accordance with the manufacturer , s instructions. Caution! Make sure a watertight seal exists on all basin drain connections. - Page 4 2. For Solid Wall installations, you must use suitable attachment bolts and wall plugs to secure the unit to the wall. Tighten bolts using an hexagonal wrench. 360mm 280mm 20mm 20mm 510mm 781mm 661mm 957mm 236mm (Inner Distance Between Side Boards) Vanity Top Cabinet 3.
- Page 5 6. Level the cabinet by adjusting the adjustment screws. The top screw will adjust the cabinet vertically, and the bottom screw will adjust it horizontally. 7. Ensure the vanity top is seated in the correct position and is secure. 8. Use a spirit level to ensure the cabinet is level. 9.
- Page 6 Install the Undermounted Unit (Inner Distance Between Side Boards) 1. Decide on the location of the unit, and mark the 457mm dimensions of the wall hanging brackets to the dimensions given. 2. Use a spirit level to ensure the wall hanging brackets are level.
- Page 7 5. Carefully unscrew the doors from the undermounted unit, and lift the doors from the hinges. Place the doors carefully to one side. 6. Screw the attachment brackets into the required locations in the undermounted unit. These brackets fit over the wall hanging brackets to hold the unit in position.
-
Page 8: Finish The Installation
Finish the Installation 1. Fit the handles to vanity top cabinet, vanity basin unit, undermounted unit and pedestal unit. 2. Place the handle on the front of the unit, and secure in place using two screws. 3. Fit the tap to the basin in accordance with the manufacturer , s instructions. -
Page 9: User Maintenance
6. Use no abrasive cleansers on any part of the cabinet. 7. The white frame should be cleaned with a damp cloth only. 8. If any fixtures caused by abnormal reasons, Kohler China can supply paid replacement for service parts caused by abnormal reasons as shown in the next page in the limited duration of warranty.