Table of Contents
Advertisement
5. Carefully unscrew the doors from the undermounted unit,
and lift the doors from the hinges. Place the doors carefully
to one side.
6. Screw the attachment brackets into the required locations
in the undermounted unit. These brackets fit over the wall
hanging brackets to hold the unit in position.
1
7. Lift the undermounted unit into position on the wall, making
sure the attachment brackets fit into the wall hanging
brackets.
8. Secure the attachment brackets with the screws, and
adjust the screws accordingly until the unit is level. Use a
level to ensure the unit is level.
9. Install the back panel onto the undermounted unit, and
secure in postion with the screws. Adjust the screws to
make sure that the back panel is upright.
10. Apply a bead of silicone sealant aound the opening in the
top of the undermounted unit.
11. Place the washbasin into the opening, and press down
firmly into position.
12. Carefully remove any excess silicone sealant.
13. Refit the undermounted unit doors on the door hinges,
and ensure the doors are fitted scurely and are level.
10.
11.
12.
13.
1038407-T01-D
5.
6.
2
7.
8.
9.
-7-
Advertisement
Table of Contents
