Table of Contents
Advertisement
6. Level the cabinet by adjusting the adjustment screws. The
top screw will adjust the cabinet vertically, and the bottom
screw will adjust it horizontally.
7. Ensure the vanity top is seated in the correct position and
is secure.
8. Use a spirit level to ensure the cabinet is level.
9. Place the basin in the desired position on the cabinet/basin
unit.
10. Install the back panel
11. Adjust the screw at each end of the back panel until it is
upright.
12. Fit the shelf supports in position in the pre-drilled holes.
13. Fit the shelf.
12.
13.
14. Refit the cabinet/basin unit doors onto the hinges, and
tighten the screws. Ensure the doors are level, and adjust
the screws in the hinges Accordingly.
14.
/
1038407-T01-D
6.
7.
8.
9.
10.
11.
1
-5-
/
/
2
Advertisement
Table of Contents
