Philips eW Burst Powercore Manual page 27

180°
360°
Aiming and Locking eW Burst Powercore Architectural Fixtures
1. To tilt the beam:
• Loosen the locking nuts on either side of the fixture yoke using a 5/16 in or 8
mm hex wrench.
• Tilt the beam as desired.
360°
• Re-tighten the locking nuts to secure the fixture in place. Torque to 25 ft-lbs
(33.9 Nm). Do not over-tighten.
5/16 in hex
8 mm hex
25 ft-lb (max)
33.9 nm (max)
2. To rotate the fixture:
• Loosen the locking nuts on either side of the fixture yoke's base using a 1/8 in
or 3 mm hex wrench.
• Rotate the fixture as desired.
• Re-tighten the locking nuts to secure the fixture in place.
1/8 in hex
3 mm hex
eW Burst Powercore Product Guide
27