Advertisement
4. If necessary, us a 5/32 in hex wrench to remove the locking screw from the trim
ring or glare shield.
5. Grab the trim ring or glare shield with both hands, flex it gently open, and clip it
to the front rim of the fixture housing.
6. Insert the locking screw into the opening on the trim ring or glare shield. Use
a 5/32 in hex wrench and torque to 6 in-lbs (.6 Nm). For eW Burst Compact
Powercore, use a 1/8 in hex wrench.
Standard
5/32 in
6 in-lbs (max)
.6 Nm (max)
Compact
1/8 in
6 in-lbs (max)
.6 Nm (max)
eW Burst Powercore
25
Product Guide
Advertisement
