Advertisement
Ensure that all junction boxes are
E
suitable for the environment and that all
wiring between junction boxes complies with
local codes.
UL / cUL
N
UL / cUL
N
Fixture cable dimensions
.38 in
(9.6 mm)
UL / cUL
UL / cUL
UL / cUL
N
2. Mount junction boxes in accordance with the lighting design plan.
3. Position each eW Burst Powercore Architectural fixture in its designated
N
4. Use four suitable mounting screws to secure each eW Burst Powercore
UL / cUL
N
5. If installing fixtures in a series, pull 3-conductor copper wire between the junction
We recommend the use of 12 AWG (2.05 mm), stranded 3-conductor copper
N
6. Use wire nuts to connect line, neutral, and ground, and tuck wire connections
UL / cUL
18 AWG
7. Secure all junction box covers. If installing in a damp or wet location, seal all
.04 in (1 mm)
CE / PSE
UL / cUL
CE / PSE
8. If installing in parallel, connect the wires from each fixture to the lead wire from
9. Connect the wire from the first fixture in the series to the line power source if
• Disengage the leader cable from the fixture's canopy base.
N
mounting location. Make sure the mounting surface is flat, suitable for the
CE / PSE
mounting hardware, and clear of debris and other obstructions.
Architectural fixture to the mounting location.
N
boxes. If installing fixtures in parallel, pull 3-conductor copper wire from line
power to a common junction box, and from the common junction box to each
fixture's junction box.
CE / PSE
wire.
CE / PSE
into the junction box.
junction boxes with contractor-grade RTV silicone sealant. Use gaskets, clamps,
and other parts and fittings required to comply with local outdoor wiring codes.
CE / PSE
the line power source in the common junction box.
installing in series, or from the common junction box to the line power source if
installing in parallel.
CE / PSE
CE / PSE
eW Burst Powercore
21
Product Guide
Advertisement
