Advertisement
Configuring the EHWIC 1 GE-SFP-CU
LEDs
Table 1
indication of your available services.
LED
SFP EN
ACT
LNK
SPD
Configuring the EHWIC 1 GE-SFP-CU
This section describes how to configure your EHWIC 1 GE-SFP-CU.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards
4
lists the LEDs and describes their functionality and different states. The LEDs provide a visual
Table 1
Color
Off
Green
Amber
Solid or blinking green
Off
Green
Off
Green
blinking
enable
configure terminal
interface type slot/subslot/port number
ip address ip-address mask
shutdown
no shutdown
exit
LED Indicators
Description
Not present.
Present and enabled.
Present with failure.
Blinks proportional to valid Ethernet traffic.
No packet transfers are occurring.
Solid green indicates the Ethernet port has a
link partner.
No link.
Note Blink indicates port speed.
1 blink before pause—10 Mbps link speed.
2 blinks before pause—100 Mbps link speed.
3 blinks before pause—1000 Mbps link speed.
OL-24318-02
Advertisement
