Using Special Effects - Digital Effect - Sony DCR-PC350 Marketing Operation Manual

60min STBY 0:00:00
MOSAIC
FADER
P-MENU
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then select [OFF] in step
4.
b Note
• You cannot use the FADER function together with:
– Self-timer
– Super NightShot function
– Color Slow Shutter function
– Digital effect
– [FRAME REC] (Frame recording)
– [SMTH INT. REC] (Smooth interval tape
recording)
Fading in from still image on the
"Memory Stick Duo" – Memory overlap
You can fade in from the still image on the
"Memory Stick Duo" to the movie currently
being recorded on the tape.
Still image
1
Check that you have a "Memory Stick
Duo" with the still image to be
superimposed and a tape in your
camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
3
Touch .
4
[
Touch MENU].
5
Select (PICT. APPLI.), then
[ OVERLAP] by touching
.
and
The recorded image appears on the
thumbnail screen.
44
Recording
6
Touch
select the still image to be superimposed.
7
Touch [ON], then
8
Touch
9
Press REC START/STOP to start
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
Using special effects
effect
You can add digital effects to the recordings.
[CINEMA EFECT] (Cinematic Effect)
You can add a cinematic atmosphere to pictures
by adjusting to a 16:9 screen and progressive
picture.
[DELAY MOTION] (Delayed Motion
Effect)
You can record a movie with a repeat effect.
[STILL]
You can record a movie while superimposing it
on a previously recorded still image.
Movie
[FLASH] (Flash Motion)
You can record a movie with a serial-still-image
effect (strobe effect).
[LUMI. KEY] (Luminance Key)
You can replace a brighter area in a previously
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
/
(previous)/ (next) to
.
.
– Digital