Sony DCR-PC350 Marketing Operation Manual page 86

A/V c DV OUT
USB-CAMERA
USB-PLY/EDT
GUIDEFRAME
86
Using the Menu
Note
b
• When you connect your camcorder to the wall outlet, [BRIGHT] is automatically selected
for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
GOFF Select when not using the Digital convert function.
ON ( )
To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to the "Computer Applications Guide."
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming).
For details, refer to the "Computer Applications Guide."
GOFF
Select to deactivate the USB Streaming function.
USB STREAM
Select to activate the USB Streaming function.
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick Duo" in your camcorder on your computer. For
details, refer to the "Computer Applications Guide."
GSTD-USB
Select to view the picture on the "Memory Stick Duo."
PictBridge Select to connect the PictBridge compliant printer (p. 110).
USB STREAM
Select to view the picture on the tape.
GOFF
Select when you do not want to display the frame.
ON Select to display the frame and check that the subject is horizontal or
vertical. The frame is not recorded. Press DISPLAY/BATT INFO to
make the frame disappear.