Engine Alternator Belt - Walker D21d Operator's Manual

Maintenance Instructions

Engine Alternator Belt

1. To remove the alternator belt:
a. Loosen the alternator mounting pivot bolt
and the alternator bracket tensioner bolt.
2. Reverse the procedure to install the belt. Adjust
and check the belt tension by referring to
CHECKING/SERVICING the Alternator Belt
Tension in this section.
Engine
Alternator Belt
Crankshaft
Pulley
Engine Alternator Belt (Loose)
Engine
Alternator Belt
Crankshaft
Pulley
Engine Alternator Belt (Tight)
REPLACING/REPAIRING
b. Pivot the alternator as shown to relax and
remove belt.
Alternator
Bracket
Tensioner
Bolt
Alternator
Water Pump
Pulley
Alternator
Bracket
Tensioner
Bolt
Alternator
Water Pump
Pulley
81