Advertisement
1.2
System Components
A complete LX package is made up of an LX amplifier, a DX motor and the appropriate
motor and resolver cables connected as shown in Figure 1.2. Cables are available from
Emerson for both the connectorized and non-connectorized motors. EMC designed
cables are recommended because they have been specially designed for the LX
amplifiers and will minimize installation problems. Table 1-A shows the available cables
and their application. For more information see Chapter 2.
Table 1-A – Motor Cabling
Motor Type
Waterproof Motors
Connectorized
Motors
All cabling is PVC, rated for 105° C.
(XXX) is length in feet, consult an Emerson EMC application engineer for cabling
requirements over 100 ft.
Figure 1.2
Typical LX component configuration
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Motor Model
DXM/E-3xxW, 4xxW HPS-XXX (shielded)
DXM/E-3xxC, -455C ECM-XXX
DXM/E-490C, -4120 ECL-XXX
DXM/E-208
Motor Cable
250036-00(non-
shielded)
LCS-XXX
Resolver Cable
250224-09
LCF-XXX
LCF-XXX
Section 1 – Page 6
Advertisement
