PHILIPS Respironics BiPAP S/T C Series Provider Manual page 10

10
5. While the software upgrade is in progress, the following screen appears on the display. The
progress bar will fill as the software upgrade process completes.
6. If the software update process was successful, the following screen appears on the display.
Remove the SD Card from the device to restart the device and use the new software.
7. If the software update process was not successful after it was initiated, the following
screen appears on the display. Remove the SD Card from the device. Reload the new
software onto the SD Card or load the new software onto another SD Card and try again.
If the problem persists, contact Philips Respironics Customer Service department at
1-724-387-4000 or 1-800-345-6443.
BiPAP S/T
1.1
1.1
1.1