Recording Additional Scenes After Finalizing - Sony Handycam DCR-DVD7E Operating Manual

Recording additional scenes after finalizing
You can record additional material on the
finalized DVD-RWs (VIDEO mode)/
DVD+RWs by following the steps below if
there is space to record on the disc.
When using the finalized DVD-RW (VR
mode) disc, you can record additional
material on the disc without any additional
steps.
• Use an AC Adaptor as power source to prevent
your camcorder from running out of power
during operation.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during operation.
• A DVD menu and a Photomovie created during
finalizing are deleted.
• When you use a double-sided disc, following
procedures are required on each side.
When using a DVD-RW (VIDEO
mode) disc (Unfinalizing)
1
Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the mains lead to
the wall socket.
2
Turn on the power by sliding the
POWER switch.
3
Insert the finalized disc into your
camcorder.
4
Touch
5
DISC SET 
Touch
[UNFINALIZE].
6
Touch [YES]  [YES], then touch
when [Completed.] appears.
46
 [SETUP].
When using a DVD+RW
If you have created a Photomovie or a
DVD menu in finalizing (p.40), the
following steps are required.
1
Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the mains lead to
the wall socket.
2
Slide the POWER switch to light
up the (Movie) or
lamp.
3
Insert the finalized disc into your
camcorder.
A confirmation dialog asking if you
record additional scenes appears.
4
Touch [YES]  [YES].
[Completed.] appears, then the screen
returns to the recording screen.
(Still)