Recording/Playback; To Check The Remaining Battery; To Initialize The Settings; Other Part Names And Functions - Sony Handycam DCR-DVD7E Operating Manual

Playback
To play back the images
in sequence.............................
See [SLIDE SHOW] on page 58.
To use PB ZOOM .......................
You can magnify pictures from about 1.1 to
5 times the original size.
Magnification can be adjusted with the
power zoom lever

.
Play back the picture you want to

magnify.
Magnify the picture with T (Telephoto).

A frame appears on the LCD screen.
Touch the portion that you want to

display in the center of the LCD screen.
Adjust the magnification with W (Wide

angle)/T (Telephoto).
To cancel, touch [END].

Recording/playback

To check the remaining battery......

Set the POWER switch to OFF (CHG),
and then press DISP/BATT INFO
you press this button once, the BATTERY
INFO appears on the screen for about 7
seconds. If you press and hold the button
for a while, this information is displayed
for about 20 seconds.
Recording
capacity
(approx.)
To turn off the operation confirmation
beep .....................................
See [BEEP] (p. 62) to set the operation
confirmation beep.

To initialize the settings ..............

Press RESET
settings, including settings for date and
 time. (Setup items customized on Personal
Menu are not initialized.)

Other part names and functions


Built-in stereo microphone

Remote sensor

Point the Remote Commander (p. 37)
towards the remote sensor to operate
your camcorder.
Recording lamp

The recording lamp lights up in red
during recording (p. 62).
Speaker

Sounds come out from the speaker.
•

. If

Remaining
battery
(approx.)

to initialize all the

For how to adjust the volume, see page 31.

33