Remaining Set - Sony Handycam DCR-DVD150E Operating Manual

MOVIE SETTINGS (Continued)
120×
Up to 60 × zoom is performed optically, and
after that, up to 120 × zoom is performed
digitally.
2000×
Up to 60 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
STEADYSHOT
You can compensate for camera shake. Set
[ STEADYSHOT] to [OFF] (
using a tripod (sold separately), then the
image becomes natural. The default setting
is [ON].
AUTO SLW SHUTTR
(Auto slow shutter)
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second. The default setting is [ON].
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP to
make the frame disappear. The default
setting is [OFF].
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.

REMAINING SET

B ON
Always displays the remaining media
capacity indicator.
AUTO
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
80
– When your camcorder recognizes the
remaining media capacity when the
POWER switch is set to
– When you press DISP to switch the
indicator from off to on when the
POWER switch is set to
– When you select the movie recording
mode on the HOME MENU.
b Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
) when
S
FACE SET
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing when
the face is recorded in Face Index.
: This icon appears when faces cannot
be recorded in Face Index.
To play back scenes using Face Index, see
page 42.
b Notes
• The number of faces detected in a movie is
limited.
(Movie).
(Movie).