Sony Handycam DCR-DVD150E Operating Manual page 103

You cannot delete images on the
"Memory Stick PRO Duo" media.
• The maximum number of images that you
can delete on the INDEX screen at one time
is 100.
• You cannot delete protected images (p. 55).
The data file name is not indicated
correctly or flashes.
• The file is corrupted.
• The file format is not supported by your
camcorder. Use the supported file format
(p. 116).
Recording
Refer also to "Media" (p. 102).
Pressing START/STOP or PHOTO
does not record images.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 37).
• Your camcorder is recording the image you
have just shot on the media.
• The media has run out of space. Format the
media (internal memory (DCR-DVD450E/
DVD850E)/DVD-RW/DVD+RW/"Memory
Stick PRO Duo" media) (p. 71). Delete
unnecessary images (p. 48), or use a new
disc or "Memory Stick PRO Duo" media.
• When you are using one of the following
discs after finalizing it, make the disc to be
able to record additional movies (p. 73). Or
use a new disc.
– DVD-RW (VIDEO mode)
– DVD+RW
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• Moisture condensation has occurred. Turn
off your camcorder and leave it for about 1
hour (p. 119).
• The number of still images exceeds the
capacity of your camcorder (p. 81, 81).
Delete unnecessary images (p. 48).
You cannot record a still image.
• You cannot record a still image on a disc on
your camcorder.
The ACCESS/access lamp lights up
even when you stop recording.
• Your camcorder is recording the image you
have just record on the media.
The imaging field looks different.
• The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movie
is less than the expected recording
time of the media.
• Depending on the conditions when recording
a fast moving object or so, the time available
for recording may shorten.
The recording stops.
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• Moisture condensation has occurred. Turn
off your camcorder and leave it about 1 hour
(p. 119).
There is a time difference between
the point where you press START/
STOP and the point that movie
recording starts/stops.
• On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
movie recording starts/stops. This is not a
malfunction.
103
Continued ,