Table of Contents
Advertisement
Trace Route Window
Figure 3-23
In the IP drop-down list, enter an IP address or choose one from the drop-down list, or enter a DNS Name and
touch Start Test. When starting a test, the trace route attempts to find all routers between the mobile computer
and the destination. The Round Trip Time (RTT) between the mobile computer and each router appears, along
with the total test time. The total test time may be longer than all RTTs added together.
Use the DNS Lookup Options button to select the name resolution priority. Select the option and touch the
OK button. If a name is entered in the IP field, DNS Lookup Options setting will decide whether to use IPv4 or
IPv6 address for the test. By default, this is set to IPv4 then IPv6, which indicates that it will try to resolve the
name to an IPv4 address; if this fails and if IPv6 is enabled, it will try to resolve the name to an IPv6 address.
DNS Lookup Options Window
Figure 3-24
Known APs Window
The Known APs window displays the APs in range using the same ESSID as the mobile computer. This
window is only available in Infrastructure mode. To open the Known APs window, touch Known APs in the
Wireless Diagnostics window.
Known APs Window
Figure 3-25
See
for the definitions of the icons next to the AP.
Table 3-7
Wireless Settings 3 - 15
Advertisement
Table of Contents
