Set Date And Time - Motorola SB1 Integrator Manual

1 - 6 SB1 Integrator Guide
Wireless Settings - use to setup the SB1 to connect to a WLAN. See
•
detailed instructions.
Set Date and Time - Use to set the time and date on the SB1.
•
Power Off Device - Use to turn off the SB1.
•
Restore Factory Defaults - Use to erase the SB1 user database.
•

Set Date and Time

NOTE The date and time can also be set using the MSP DateAndTime package or configuring Fusion to enable
Auto Time Config. Only one method should be used to set the date and time to avoid conflicts.
To set the date and time on the SB1:
Touch . The Settings screen appears.
1.
Touch . The More Settings screen appears.
2.
Touch Advanced Settings. The Advanced Settings screen appears.
3.
Touch Set Date and time. The Set date and Time screen appears.
4.
Date and Time Screen
Figure 1-10
Touch the date field. The Set Date screen appears.
5.
Set Date Screen
Figure 1-11
Touch to delete the current date.
6.
Use the keypad to enter the new date in the format DD/MM/YYY.
7.
Touch
8.
Touch the time field. The Set Time screen appears.
9.
. The Set Date and Time screen appears.
Chapter 3, Wireless Settings
for