Table of Contents
Advertisement
Mounting Bracket
Use the mounting bracket to mount the Ten Slot Charge Only cradle to a wall or 19 inch rack.
Setup
To set up the Ten Slot Charge Only Cradle:
Remove the backing from the black rubber pad and place onto the back of the Ten Slot Charging Cradle as
1.
shown.
Place the power supply into the mounting tabs.
2.
Install Power Supply
Figure 2-5
Plug the AC line cord into the power supply.
3.
Wrap the power supply cord around the cable guides.
4.
Accessories
2 - 7
Advertisement
Table of Contents
