Editing; Checking The Disc Information - Sony DCM-M1 Operating Instructions Manual

— Editing —

Checking the disc information

You can check the track numbers, remaining time, etc.
Contents display
DISC INFORMATION
NAME
Displaying the disc information
(1) Touch
(2) To check the remaining time or tracks, touch REMAIN.
(3) To close the disc information display, touch CLOSE.
Labelling the disc
You can label a disc using up to 100 characters.
(1) Touch the NAME box on the disc information display.
(2) Input characters (p. 80).
Note on the figure in "TOTAL"
•"TOTAL" shows the total playback time of movie, photo, memo and title tracks
recorded in the disc. Playback time of each still picture track (photo, memo and title) is
the one set in the menu.
•If more than 10 hours total playback time is recorded in the disc, "10HOver" appears.
Note on the figure in "REMAIN"
•"REMAIN" shows the remaining recording time or tracks.
•If you set REC MODE to VP, you may be able to record longer than the indicated
recording time.
58
12.24.1999
1ST REC
CONTENTS REMAIN
100 TRACKS 5:26
10 TRACKS 10:26
TOTAL
100 TRACKS 20:00
CLOSE
at the top-right corner of the index display.
The disc information display appears.
01:23
INTRO REMAIN
0001 7.4.1999 2:58 00:07
PM
Remain display
DISC INFORMATION
NAME
CONTENTS REMAIN
DISC INFORMATION
NAME
12.24.1999
1ST REC
CONTENTS REMAIN
100 TRACKS 5:26
10 TRACKS 10:26
TOTAL
100 TRACKS
20:00
CLOSE
12.24.1999
1ST REC
4:26 8:12:42
6:26 2000 TRACKS
8:26
CLOSE