Sony DCM-M1 Operating Instructions Manual page 32

Playing a disc
To control using the buttons on the camcorder or Remote
Commander
When the name of the buttons of the camcorder differs from the buttons of the Remote
Commander, those of the Remote Commander are shown in parenthesis.
To play
•Select the desired track, then press u (N).
•Turn the control dial (press cursor B/V/v/b) to select the desired track, then press
the dial (ENTER).
To stop
Press x during playback.
To pause
Press u (X) during playback.
To return to normal play, press u (X) again.
To go to the next track
Press > briefly during playback. Each time you press >, it goes to the top of the
next tracks.
To go to the previous track
Press . briefly during playback. First press of . goes to the top of the current
track. If you repeat pressing . in sequence, it goes to the top of the previous track.
To locate a scene monitoring the picture
Keep pressing . or > during playback. To resume normal playback, release the
button.
To view the picture frame-by-frame
(1) Press u (
(2) Turn the control dial (press cursor
To resume normal playback, press u (N).
To view the picture at slow speed (movie only)
You can play at the desired speed.
(1) Press y during playback.
(2) Turn the control dial (press cursor
To resume normal playback, press u twice.
(On the Remote Commander, press N).
In the playback modes other than normal
Sound is muted.
While playing still pictures
If you try frame-by-frame playback, it goes to the first frame of the next track.
During slow playback
•If you turn the control dial, the playing speed changes.
•If you press . and >, slow playback is canceled.
•The speed adjusting bar appears at the beginning of slow play and while adjusting the
speed.
32
X ) during playback.
The picture is played at 1/3 speed. The speed adjusting bar appears.
B /V/v/b
).
B /V/v/b ) to adjust the speed.