Door Opening Limiters - Miele CVA 7840 Operating And Installation Instructions

Two TX20 (25 mm) screws are
included with the machine.
 Secure the coffee machine to the side
walls of the furniture unit using the
screws supplied. Tighten both screws
by hand.
Tip: To make it easier to attach the
screw on the left, you can remove the
door opening limiters and increase the
door opening angle to approx. 170°
(see "Door opening limiters"). Make
sure that there is sufficient space
available and that the machine door is
not going to hit an adjacent wall.
 Carry out a functional check on the
coffee machine.

Door opening limiters

The coffee machine door hinges are
equipped with door opening limiters
that restrict the opening angle of the
machine door to approx. 120°. This will
prevent the machine door from hitting
an adjacent wall and being damaged
when opened.
The door opening limiters can be
removed, allowing you to increase the
opening angle to approx. 170°. This
makes it easier to remove the bean
containers, for example.
Removing the door opening limiters
Make sure that sufficient space is
available for the larger door opening
angle and that the machine door is
not going to hit an adjacent wall.
 Remove the door opening limiters
from the hinges, e.g. by prising them
out with a screwdriver.
The machine door opening angle has
now been increased to approx. 170°.
Installation
107