Cleaning The Cup Rim Sensor - Miele CVA 7840 Operating And Installation Instructions

 Take the dispensing unit apart,
separating it into 3 components: the
Y-piece, the spouts and the holder.
 Clean all parts thoroughly.
 Clean the area around the central
spout with a damp cloth.
Reassembling the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
Cleaning and care
 Fit the dispensing unit back together.
Press down firmly so that the spouts
become securely connected to the
holder.
 Insert the dispensing unit into the
coffee machine and connect the milk
pipe.
 Refit the stainless steel cover.
 Close the machine door.
Fit cover to central spout
display.
 Confirm the message with OK.

Cleaning the cup rim sensor

The cup rim sensor is located under the
central spout.
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
will appear in the
67