Sony Handycam Vision CCD-TRV17 Operating Instructions Manual page 83

Identifying the parts and controls
rh
rj
rk
rl
t;
rh Viewfinder (p. 5)
rj EJECT switch (p. 15)
rk LANC control jack
LANC stands for Local Application
Control Bus System. The
is used for controlling the tape transport
of video equipment and other
peripherals connected to the video
equipment. This jack has the same
function as the jack indicated as
CONTROL L or REMOTE.
rl Cassette compartment (p. 15)
t; Grip strap
ta S VIDEO jack (CCD-TRV67/TRV87
only) (p. 27)
ts Built-in light (p. 49)
td LIGHT switch (p. 49)
Fastening the grip strap
Fasten the grip strap firmly.
tf RFU DC OUT (RFU adaptor DC output)
jack (p. 28)
tg MIC jack (PLUG IN POWER)
Connect an external microphone
(not supplied). This jack also accepts
control jack
a "plug-in-power" microphone.
If you connect a 2-pin microphone,
supply power from DC OUT jack.
In this case, WIND in the menu settings
does not function. (CCD-TRV87 only)
th AUDIO/VIDEO jacks (p. 27)
tj i (headphones) jack (CCD-TRV87
only)/v (earphone) jack (CCD-TRV17/
TRV37/TRV57/TRV67 only)
When you use headphones(CCD-TRV87
only)/earphone (CCD-TRV17/TRV37/
TRV57/TRV67 only), the speaker on
your camcorder is silent.
ta
ts
td
tf
tg
th
tj
83