Sony Handycam Vision CCD-TRV17 Operating Instructions Manual page 39

Using special effects – Digital effect
(1) While your camcorder is in the standby or recording mode, press DIGITAL
EFFECT. The digital effect indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
The indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL y SLOW SHTR y OLD MOVIE
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
In the STILL and LUMI. modes, the still picture is stored in memory.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect as follows:
STILL – The rate of the still picture you want to superimpose on the moving
FLASH – The interval of flash motion
LUMI. – The color scheme of the area in the still picture which is to be
TRAIL – The vanishing time of the incidental image
SLOW SHTR – Shutter speed. The larger the shutter speed number, the
OLD MOVIE – No adjustment necessary
The more bars there are on screen, the stronger the digital effect. The bars
appear in the following modes: STILL, FLASH, LUMI. and TRAIL.
1
DIGITAL EFFECT
2
LUMI.
To cancel the digital effect
Press DIGITAL EFFECT. The digital effect indicator disappears.
picture
swapped with a moving picture
slower the shutter speed.
3
LUMI.
4
39