Disassembly And Assembly Instructions; Remove The Rear Cover; Remove The Fan; Remove The P-Board - Panasonic TX-P42G15B Service Manual

8 Disassembly and Assembly Instructions

8.1.

Remove the Rear cover

1. See Service Hint (Section 3)
8.2.

Remove the Fan

1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3
3. Remove the relay connectors and remove the Fan unit.
4. Remove the screw (×1
5. Remove the Fan.
).
) on the back side.
8.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P7, P9, P11, P25,
P34 and P35).
3. Remove the screws (×9
8.4. Remove
cover and Rear terminal cover
1. Remove the claw (×1
2. Remove the Side terminal cover.
20
) and remove the P-Board.
the Side terminal
).