4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (×1
8.22. Remove the Front glass
1. Remove the Cabinet assy. (See section 8.12.)
2. Remove the S-Board. (See section 8.21.)
3. Remove the screws (×5
4. Remove the screws (×4
5. Remove the Glass holder side (L, R).
6. Remove the screws (×7
7. Remove the Glass holder top front.
8. Remove the Glass holder bottom front.
9. Remove the Front glass.
) and remove the S-Board.
).
).
).
8.23. Remove the K-Board
1. Remove the Front glass. (See section 8.22.)
2. Remove the screws (×2
3. Remove the claw (×1
4. Disconnect the connector (K1) and remove the K-Board
from LED Panel.
8.24. Remove the GL-Board
1. Remove the Front glass. (See section 8.22.)
2. Remove the screws (×2
3. Disconnect the connector (GL02) and remove the GL-
Board.
27
).
).
).