8.10. Remove the Control button unit
1. Disconnect the connector (C14).
2. Remove the screws (×2
3. Remove the Control button unit.
8.11. Remove the GK-Board
1. Remove the Control button unit. (See section 8.10.)
2. Remove the screws (×2
3. Remove the GK-Board MTG. metal.
4. Remove the claw (×3
5. Disconnect the connector (GK1).
6. Remove the GK-Board from Control button.
).
).
).
8.12. Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding prop (×1
4. Remove the screws (×2
Board.
23
).
, ×2
) and remove the SU-