Philips VisaPure Advanced SC53 Series User Manual page 22

22
English
2 Moisten the brush head and your face with water. Do not use the
appliance with a dry brush head, as this can irritate the skin. If
preferred, you can put a bit of cleanser onto the brush head. Push
the cleanser slightly down in between the bristles, so it does not
fall off. Do not apply too much cleanser onto the brush head to
prevent cleanser from splashing into the eyes when the treatment
starts.
3 Switch on the appliance.
4 Place the Precision brush head on the right side of your nose.
Gently move the brush head up and down across the right side of
your nose, and if preferred, also in the mouth area (Fig. 28).
Important: Make sure that you avoid the delicate skin around the
eyes. Make sure you do not treat your lips, the inside of the nose
and areas around your eyes with the brush head.
Note: Do not push the brush head too hard onto the skin, to make
sure that the treatment remains comfortable.
5 After 15 seconds, the appliance pauses briefly to let you know that
you have to move it to the other side of your nose (Fig. 29).
6 When the program is finished, clean the brush head with water
(max. 40°C) and mild soap.
Important: Make sure you rinse off the soap properly.
Important: Make sure you dry the brush head after cleaning it. First
shake off the water. Then dry it with a clean towel.
7 Let the brush head dry on the appliance in the charging stand
(without the protection cap), or on the storage pallete. Make sure
you press the bristles back into shape, so they can dry properly
and remain straight.
8 Once the brush head is dry, you can use the protection cap to
protect the bristles (during traveling or for storage). Do not cover
the brush head with other materials. Make sure the brush head is
dry before traveling.