Step 9: Installation Review
Now let us review the hardware installation process, assuring that:
All connectors are properly connected.
Each SCSI device has its own unique SCSI ID number.
The last physical SCSI device on the bus is properly terminated.
Notes
Red edge of 50 pin flat SCSI cable must be on pin 1 of host adapter.
The following is a sample configuration of CD-RW installation.
CD-R/W Drive
Audio Cable
(included)
Sound Card
(Not included)
Speakers
(Not included)
Step 10: Closing the Computer
Carefully replace computer cover, per Owner's Manual.
Hardware installation is now complete!
14
Hardware Installation
Red Edge
ACTIVE TERM
TEST
Power
ID SELECT
DC INPUT
AUDIO OUT
5V±5% GND 12V±10%
R GND L
0 1 2
INTERFACE CONNECTOR
Supply
Cable
SCSI
Cable
Red Edge
(Not included)
49
1
50
2
SCSI Card
(Not included)
Software Installation
Please refer to CD-RW formatting software/CD manual for instruction on
software installation. CD-RW formatting software must first be properly
installed in order to write CD's with this device.
Using Discs
Storing Discs
Do not store the disc in a location subject to:
– high humidity
– high temperature
– excessive dust
– direct sunlight
Care of Discs
Only hold disc by its edge. Do not touch the record surface.
Do not wipe CD-R/RW discs before recording data.
To avoid scratching the recording surface, blow away dust using an air
blower.
Software Installation/Using Discs
15