Screws - Sony BDV-F700 Operating Instructions Manual

3
Reattach the speaker stand by engaging the protrusions on the stand in the holes for
either a vertical or upward angle.
Vertical or
upward angle
4
Thread the speaker cord though the slit of the stand base to prevent the cord from being
twisted or pinched.
5
Tighten the screws to secure the speaker stand.
Note
• Be careful not to pinch the speaker cords while tightening the screws.
Assembling the speakers
(BDV-F700 only)
For assembling the speakers, refer to "Speaker Installation Guide."
16
GB
Vertical angle

Screws

Upward angle