Mitsubishi Electric PEAD Series Service Manual page 45

DISASSEMBLY PROCEDURE
6. Heat exchanger
1. Remove the drain pan according to the procedure
in section 3.
2. Remove the heat exchanger cover according to
the procedure in section 4.2.
3. Removing the cover
(1) Remove the five fixing screws on the cover
4. Removing the Heat exchanger
(1) Remove the fixing screws on the heat
exchanger (L) to remove it.
HWE16080
Exercise caution when removing heavy parts.
Fig. 12
(L)
Fig. 13
45
(K)