Ypsilon SET 100 MKIII Owner's Manual page 3

PLACEMENT OF THE SET-100 POWER AMPLIFIER
SET-100 power amplifier is designed to reduce interference from external magnetic and
radio fields. Although placement is not critical, any magnetic fields should be avoided.
A solid and sturdy surface should be used as this amplifier has a substantial weight.
Take great care if planning on moving or lifting it and make sure that the weight is not
going to cause any injuries.
As it will generate quite some heat, in order to achieve the best operating conditions, it is
strongly suggested that there is good air circulation around the amplifier and especially
on its top where its coolers are positioned.
3