NO.
Parts
2
CONTORL IN
Procedure
11) seperate Blade motor
connect wire. Along with a picture
12) Loosen MOTOR Wire.
Caution:
When you separate the
connector, pull pressing the lock-
ing button.
13) Loosen the Thermistor wires,
Display wire and Humidity wire
connector.
Caution:
When you separate the
connector, pull pressing the lock-
ing button.
14) Loosen the ground wire.
15) Loosen the remote control PCB
wire connector.
Caution:
When you separate the
connector, pull pressing the lock-
ing button.
25
Remark