BST KLC 20 Technical Information

KLC 20 KLC 20
Technical Information Technical Information
Wide Band Flame Detector KLC 20 Wide Band Flame Detector KLC 20
for all kind of oil flames with intermittent burner operations for all kind of oil flames with intermittent burner operations for all kind of oil flames with intermittent burner operations
Short Description
The wide band flame detector KLC 20 is a compact flame detector, which is special designed for The wide band flame detector KLC 20 is a compact flame detector, which is special designed for The wide band flame detector KLC 20 is a compact flame detector, which is special designed for
blue burning combustion systems. The patented evaluation of the flame signal is based on the blue burning combustion systems.
flicker frequencies of the flame. A RISC-Processor enables the evaluation and conversion of the flicker frequencies of the flame.
flame signal into digital information to provide an output signal for burner control boxes. All flames flame signal into digital information to provide an output signal for burner control boxes. All flam flame signal into digital information to provide an output signal for burner control boxes. All flam
will be detected by an automatic sensitivity control. Adjustments during commissioning and will be detected by an automatic sensitivity control.
maintenance are not necessary! maintenance are not necessary!
Due to international standards the flame detector KLC 20 will only detect signals caused by the Due to international standards the flame detector KLC 20 will only detect signals caused by the Due to international standards the flame detector KLC 20 will only detect signals caused by the
flicker of the flame and no signal from continuous radiation and all kinds of constant frequency. flicker of the flame and no signal
These fare signals caused by disturbing light sources, e.g. fluorescent tubes or background These fare signals caused by disturbing light sources, e.g. fluorescent tubes or background These fare signals caused by disturbing light sources, e.g. fluorescent tubes or background
radiation from hot refractories will be cut off, so that unwanted influences are not possible. radiation from hot refractories will be cut off, so that unwanted influences are not possible. radiation from hot refractories will be cut off, so that unwanted influences are not possible.
The flame detector is equipped with an optical interface to get online information about monitoring lame detector is equipped with an optical interface to get online information about monitoring lame detector is equipped with an optical interface to get online information about monitoring
of flame signal and serial number. of flame signal and serial number.
(formerly known as KLC 2002) (formerly known as KLC 2002)
The patented evaluation of the flame signal is based on the
Processor enables the evaluation and conversion of the
from continuous radiation and all kinds of constant frequency.
Adjustments during commissioning and
TB_KLC_20_EN_REV1.DOCX
CE0085BP0001