BST KLC 10 Technical Information

KLC 10 KLC 10
Technical information Technical information
UV - flame detector KLC 10 flame detector KLC 10 for oil -, gas- and
dual fuel burners for
Description
The KLC 10 is a compact UV flame detector, which h
combustion which produces little
modulation/flicker frequency. The
not react to background radiation from hot refractory or t react to background radiation from hot refractory or from any other infra
The flame detector is equipped with an optical interface The flame detector is equipped with an optical interface which visibly indicate
intensity. The KLC 10 can be
It is compatible in its physical dimensions and
detectors. All KLC accessories are identical
components used in production and in production and makes it simpler for field application and
The flame detector KLC 10 has been developed to meet the requirements of European The flame detector KLC 10
Standards EN298:2012-11 for
after normal burner shut down when the normal burner shut down when the flame amplifier is permanently energised.
(formerly known as KLC 1000) (formerly known as KLC 1000)
for intermittent burner operations
mpact UV flame detector, which has been developed f
little light or radiation in the visible spectrum and has
The design of the UV sensor ensures that the
be connected directly to the ionisation or LDR input of the control box. directly to the ionisation or LDR input of the control box.
physical dimensions and connection capability to other series KLC flame
accessories are identical and therefore this reduce
makes it simpler for field application and service.
has been developed to meet the requirements of European
for burner management control units which make a 'no
burner operations
developed for single flame
ensures that the flame detector does
from any other infra-red light source.
indicates the flame signal
to other series KLC flame
reduces the variety of
make a 'no-flame' check
energised.
0 0 8 5
and has very low flame
TB_KLC10_EN_REV0.DOCX